Geotechnical & Structural MonitoringHome > Products > Geotechnical & Structural Monitoring

  • Little Dipper In-Place Inclinometer

    Model:906
    Country of Origin:USA, Jewell
    Use:Monitor lateral movement of slopes, embankments, trenches and tunnel walls; Monitor ground settlement beneath tanks and fills; Monitor surface movements by direct burial in shallow boreholes; Cast Little Dippers in place to monitor structural deformation.

    Details

  • Pro 3600 Digital Protractor

    Model:Pro 3600
    Country of Origin:USA, Jewell
    Use:This revolutionary, handheld measuring tool provides an immediate, digital reading of all angles in a 360° circle.

    Details

  • Profil Digital Inclinometer System

    Model:Profil
    Country of Origin:Canada, Roctest
    Use: Inclinometers are used to monitor subsurface deformations of the ground in landslides, embankments and dams, and around deep excavations and tunnels. Inclinometer casing is installed in a vertical borehole that passes through suspected zones of movement into stable ground.

    Details

  • RxTx Remote Reading Pendulum Station

    Model:RxTx
    Country of Origin:Canada, Roctest
    Use:The RxTx Telependulum is a highly sophisticated and precise optoelectronic horizontal and vertical displacement measurement device.

    Details

  • DIRECT & INVERTED Pendulums

    Model:DIRECT & INVERTED
    Country of Origin:Canada, Roctest
    Use:The direct pendulum consists of a wire suspended from the upper point and a reading station fi xed to the structure at the lower point. The wire is tensioned by a suspended weight submerged in a damper tank.

    Details

  • RTF Surface jointmeter

    Model:RTF 1D/3D
    Country of Origin:Canada
    Use:The RTF is a jointmeter used to measure displacement of cracks in structures or rock masses. The sensor is housed in a rugged waterproof enclosure which is fitted at one end with a spring-loaded rod resting against the reference surface located on the opposite side of the discontinuity. Supplied with installation template, the RTF is available in uniaxial (RTF 1D) or triaxial (RTF 3D) version.

    Details

  • FOD Fiber optic Displacement Sensor

    Model:FOD
    Country of Origin:Canada
    Use:The FOD is a fiber optic linear position and displacement transducer used to monitor relative movements of adjacent surfaces across cracks or construction joints in concrete and rock.

    Details

  • PF Series Portable jointmeter

    Model:PF
    Country of Origin:Canada
    Use:The PF is a portable jointmeter. It is a practical and affordable instrument used to measure relative displacement of cracks or joints over time.

    Details

  • REPP-R Potentiometer jointmeter

    Model:REPP-R
    Country of Origin:Canada
    Use:The REPP-R is a potentiometer jointmeter transducer for remote monitoring of traction or compression movement such as discontinuities of rock mass or blocks, construction joints in concrete, and expansion joints of steel structures.

    Details

  • JM Series Vibrating wire jointmeter

    Model:JM-S, JM-E
    Country of Origin:Canada
    Use:The JM is a jointmeter used for monitoring displacement between concrete lifts in concrete dams.

    Details

  • Total 70 Products, Current Page 7/7 FirstPrev NextLast

    Copyright © 2008~2015 Earth Products China Ltd. all rights reserved. 粤ICP备12064742号
    Hong Kong Headquarter Address: 12/F, Asia Trade Centre,79 Lei Muk Road,Kwai Chung, Hong Kong Tel: +852 2392 8698
    Hotline:400-700-9998 E-mail:marketing@epc.com.hk HTMLSITEMAP|XMLSITEMAP
    ;