Concrete Strength Testing


    • Proceq - Pull-Off Test DY-216
    • Model: Proceq - Pull-Off Test DY-216
      Country of Origin: Switzerland
      Use: Evaluate bond strength of coatings and cementitious material with pull-off testing

      The instrument complies with international standards: 
      EN 1542, EN 1015-12, EN 1348, ISO 4624, ASTM D 4541, ASTM C 1583, ASTM D 7234, ASTM D 7522, ZTV-ING, SIA 281/3, JGJ 110, JGJ 126, JGJ 144, ГОСТ 22690
    • Proceq - Original Schmidt
    • Model:Original Schmidt
      Country of Origin:Switzerland
      Use:Concrete testing with the Original Schmidt test hammer is the most frequent used method for non-destructive concrete testing worldwide.

      The instrument complies with international standards: 

      USA: ASTM C805, ACI 228.1R

      Europe: EN12504-2, EN13791

      China: JGJ-T23

      Japan: JCSE-G504

      ISO 1920-7

      JIS A1155

      Russia: GOST 22690-2015

    • Proceq - Pull-Off Test DY 225
    • Model: DY 225
      Country of Origiin: Switzerland
      Use: Proceq DY-225 is an automated pull-off tester with a maximum pulling force of 25 kN (5620 lbf). It is suited for very high strength applications such as testing of fibre reinforced polymers (FRP) bonded to concrete structures. 
    • Proceq - PaperSchmidt and Equotip 550 Leeb U
    • Model: PaperSchmidt and Equotip 550 Leeb U
      Country of Origiin: Switzerland
      Use: Out of round rolls and other defects such as corrugations caused by non-uniform roll hardness profiles are a major cause of lost production for both producers and converters alike. A reliable measurement of the roll hardness profile is of critical importance in deciding whether a roll is good or bad. Proceq’s instruments give the production staff the support they need to quickly and reliably test the roll hardness and to interpret the results as efficiently as possible. It enables the user to quickly and precisely diagnose roll imperfections, hardness inconsistencies and uneven winding, thereby preventing problems for printing and converting operations.
    • Giatec - RCON2 Concrete Bulk Resistivity
    • Model:RCON2
      Country of Origin:Canada
      Use:Giatec RCON2™ is a non-destructive device for measuring the electrical resistivity of concrete specimens in the laboratory without any additional sample preparation requirements.
    • Proceq - Silver Schmidt concrete test hammer
    • Model:Silver Schmidt
      Country of Origin:Switzerland
      Use:The SilverSchmidt offers a virtually maintenance free, lightweight and compact construction for concrete testing.
  • 1
  • 2
  • Application case
    Small class | high density elec

    The high density resistivity instrument High density electrical apparatus is a traditional method based on the theory of a new generation of electrical equipment in the development of computer and information monitoring based on modern scie

    Total Solution Provider for Advanced Civil Engineering Testing Instruments
    • 400-700-9998
    • Service Time : Monday to Sunday, 9:00-18:00
    • E-mail :
    Copyright © 2008~2021 Earth Products China Ltd. all rights reserved. 粤ICP备12064742号 Domestic headquarters address:West Tower 2301, Fortune Plaza, No. 116, sports east road, Tianhe District, Guangzhou
    Hong Kong Headquarter Address:12/F, Asia Trade Centre, 79 Lei Muk Road, Kwai Chung, Hong Kong
    About Us