MIT Dresden MIT-SCAN-T3 Thickness Measuring Device
Thickness Measuring Device
    Model: MIT Dresden MIT-SCAN-T3 Thickness Measuring Device
    Country of Origin: Germany
    Use: Measurement Of Layer Thickness On Asphalt And Concrete Roadways

    The instrument complies with international standards:

    ASTM E3209 - 19
    ZTV Asphalt-StB 07
    TP D-StB 12
    EN 12697-36
    ÖNORM EN 12697-36
    RVS 11.03.21, Abs. 5.2.1
    Standardleistungskatalog (STLK)
  • consult
Details Solution Applications Downloads Order
MIT Dresden MIT-SCAN-T3 Thickness Measuring Device
ASTM E3209 - 19
ZTV Asphalt-StB 07
TP D-StB 12
EN 12697-36
ÖNORM EN 12697-36
RVS 11.03.21, Abs. 5.2.1
Standardleistungskatalog (STLK)

The MIT-SCAN-T3 was developed for the nondestructive and precise analysis of asphalt and concrete pavements. Unbound courses of the upper pavement structure (frost protection layer and aggregate base layer) can also be assessed.

The nondestructive measurements are based on pulse induction technology. However, a prerequisite is the installation of a metallic reflector (antipole) of aluminum or steel at the base of the pavement layer to be measured. Layer thickness can be determined directly during paving (self-monitoring) or later as part of control inspections (external monitoring) performed for acceptance of construction work. To take a measurement, the MIT-SCAN-T3 is run over the measuring site. Within seconds, it accurately determines layer thickness. This way, based on a larger number of measuring sites, pavement thickness can be measured extensively and effectively.

- Durable device with a long service life if handled correctly
- Effective control of paving deviations
- Self-monitoring during construction for quality assurance
- Inspections of large stretches within short time
- Measures by simple run over the pavement surface
- Requires no mechanical coring
- High measurement precision:  ±(1 mm + 0.5% of measured value)
- High resolution (800 data points per measurement)
- Exact and reproducible measurement results
- Robust and compact hand-held instrument
- Safe transport in high-quality carrying case (car suitable)
- Measures on hot asphalt, milled surfaces and concrete
- Measures under humid conditions and on wet pavement surfaces
- Measurement with all standard reflectors acc. to the German specification TP D-StB 12
Rapid And Efficient
- Immediately ready for use
- Without on-site calibration
- Fast and exact reflector location (search mode)
- Without complex search of reflector center
- Automatic plate detection (reflector)
- Measurement including analysis in less than a minute (measuring mode)
- Without pavement damage
- Mindful of nature and the environment
- Free of emissions

Related Recommendations
Total Solution Provider for Advanced Civil Engineering Testing Instruments
  • 400-700-9998
  • Service Time : Monday to Sunday, 9:00-18:00
  • E-mail :
Copyright © 2008~2021 Earth Products China Ltd. all rights reserved. 粤ICP备12064742号 Domestic headquarters address:West Tower 2301, Fortune Plaza, No. 116, sports east road, Tianhe District, Guangzhou
Hong Kong Headquarter Address:12/F, Asia Trade Centre, 79 Lei Muk Road, Kwai Chung, Hong Kong
About Us