Cooper One-Man on site coring machine CRT-SCM is self contained and provides a rigid and stable drill platform for all types of coring in a wide variety of asphalt & concrete surfaces for medium duty.
To carry out any form of testing requires straight & clean sided core samples.
Vibration of a diamond core drill during the coring process will result in a badly finished core that will need to be ‘dressed’ before any meaningful testing can be carried out. In addition vibration of a core drill will also quickly damage the diamond cutting face by erosion of the inpidual diamonds resulting in rapid wear rates.
Coring should always be carried out using a rigid, stable & vibration free operating platforms to ensure the integrity of core samples.
Cooper One-Man Coring Machines CRT-SCM are self contained and provide a rigid and stable drill platform for all types of coring in a wide variety of asphalt & concrete surfaces.
The manually operated drill feed control provides for a rapid but safe drill penetration with minimum core bit wear rate.
● Petrol engine 5.0KW
● Drill diameters up to 160mm
● Drill depths up to 450mm
● Wide variety of drill motor options
● Electrically operated water feed system
● Water capacity 25 or 50 litres
● Platform is operator stabilized
● Power pack can also power an additional hydraulic breaker/tamper