PDI Thermal Evaluation of Mass Pours (TEMP)
Thermal Integrity Profiler
    Model:PDI Thermal Evaluation of Mass Pours TEMP
    Country of Origin:USA
    Use:Exceeds ASTM C1074. TEMP (Thermal Evaluation of Mass Pours) is a system that measures temperatures in various points of a mass concrete pour, as the curing cement generates heat. TEMP allows for remote notifications via Short Message Service (SMS).
  • consult
Details Solution Applications Downloads Order

Thermal Wire® Cables are fitted with custom-spaced temperature sensors. The copper cable is cast into the concrete, often tied to the reinforcement.

Each Thermal Wire cable may include any number of sensors, and is connected to a single external TEMP data logger. TEMP data loggers read and store up to 28 days of temperature measurements and are powered by a replaceable battery. There are no batteries on the sensors themselves. Replacing the TEMP data logger battery makes it possible to monitor and store data indefinitely.

Data is transferred from the TEMP data loggers to the TEMP main unit for observation, and then analyzed by the TEMP-S software.

TEMP-S provides the user with graphs versus time of measured maximum temperatures and maximum differences in temperature (Delta). These are presented along with allowable limits. TEMP-S also calculates concrete maturity based on measured temperatures, and helps the user estimate concrete strength based on a user-determined strength-maturity relationship.

TEMP measurements comply with ”ASTM C1074 – 11 Standard Practice for Estimating Concrete Strength by the Maturity Method.”

Technical Specification

TEMP-Q Data Logger

  • Size: 160 mm X 80 mm X 57 mm (6.3 in x 3.2 in x 2.2 in)
  • Weight: 540 g (1.2 lbs.)
  • Temperature Range: Operating: -20 ° C to 65 ° C (4 º F to 149 º F); Storage -40 ° C to 85 ° C (-40 º F to 185 º F)
  • Contains 4 installed Li-Ion battery
  • Internal Battery (28-day duration)
  • Sampling frequency: user programmable, defaulted to once every 15 minutes
  • Contains 2 data acquisition ports
  • Hangs from reinforcement cage; may be bolted to cage for security
  • Water Resistant

TEMP-S Software

  • Furnished with a license for TEMP-S
  • Cloud based data retrieval

Thermal Wire® Brand Cables

  • Custom ordered: each sensor comes standard with 3 m (10 ft) of cable
  • Sensor type: digital
  • Sensor operating temperature: up to 105°C
  • Technical manual provided in PDF form on a USB drive



Related Recommendations
Total Solution Provider for Advanced Civil Engineering Testing Instruments
  • 400-700-9998
  • Service Time : Monday to Sunday, 9:00-18:00
  • E-mail : marketing@epc.com.hk
Copyright © 2008~2020 Earth Products China Ltd. all rights reserved. 粤ICP备12064742号 Domestic headquarters address:West Tower 2301, Fortune Plaza, No. 116, sports east road, Tianhe District, Guangzhou
Hong Kong Headquarter Address:12/F, Asia Trade Centre, 79 Lei Muk Road, Kwai Chung, Hong Kong
About Us