New-Style! Removable Infrared Thermal Imaging Camera "Thermo FLEX F50" Debut!
"Thermo FLEX F50 series" is a completely "New-Style" infrared thermal imaging camera can be easily rotated and separated camera-head and controller.
You can take various measurement styles in a wide variety of measurement scene!.
”Thermo FLEX F50 Special Site”
Various Angles and Various Measurement Styles
Removable camera-head and controller help your safely and stably measuring posture at every angle even at the difficult place to measure.
Camera-head can be tilted and can be mounted on the both joint of controller.
Removed camera-head from controller.
Camera-head can be freely operated.
Rotating camera-head by tilting sense provides you comfortable shooting without facing upward to the high angle.
You can shoot from any angle comfortably by the removable camera-head while watching the controller.
The removable camera-head can be turned around to the gap or the backside of the equipment even at the dark or narrow.
You can identify objects and capture visible images brightly with the "LED light" on camera-head.
The removable camera-head can be put into the device such as thermostatic chambers.
You can operate the camera-head by touch-screen of the external controller while checking the measurement status.
The camera-head and controller can be mounted on tripod or fixed on wall by their screws.
You can operate remotely by the controller without touching the camera-head.
The camera-head and controller can be attached to commercial accessories.
For example, attach the camera-head to a helmet with a sense of wearable or attach the controller to a pole as camera stick.
Un-necessary to Adjust the Focus owing to Wide Angle Lens for Efficiency
The camera-head with 70° or 35° wide angle lens can be detect extensively even in the gap or the backside of the equipment.
If you are not familiar with shooting such as adjusting focus, this wide angle camera will help you to adjust the focus very easily!
70° type wide angle lens can be shot the entire image of the switchboard by one-shot!
Adjusting the focus is no longer needed!
The lens focus on to the building 50 meters ahead.
70℃ heat resistance camera-head save time on testing
70℃ heat resistance camera-head can be put into a thermostatic chamber, which is impossible for the conventional models.
You can operate by the controller attached with outside of the thermostatic chamber.
It is unnecessary for you to do troublesome work was taken much time (about half a day!) such as attaching thermocouple to the thermostatic chambers used for thermal environmental testing.
Easy and Intuitive Operation by Touch-Screen
Operation and setting can be performed by Touch-Screen Operation such as smartphone feeling.
Easy Hardware Key Operation even wearing gloves
Frequent operation such as "Temperature Scale Setting" and "Recording" can also be performed by hardware key. Comfortable measurement is possible even wearing gloves.