Digital telemeter Type 6-Component Wheel Force M
6-Component Wheel Force Measuring System
    Model:Digital telemeter Type
    Country of Origin:Japan
    Use: The 6-Component Wheel Force Measuring System is comprised of the 6-Component Wheel Force Transducer and the exclusive 6-component force analyzer. There are two types available, the slip-ring type and digital telemeter type, each using a different method to transfer the 6-component force information.
  • consult
Details Solution Applications Downloads Order
 The 6-Component Wheel Force Measuring System is comprised of the 6-Component Wheel Force Transducer and the exclusive 6-component force analyzer. There are two types available, the slip-ring type and digital telemeter type, each using a different method to transfer the 6-component force information. The digital-telemeter 6- Component Wheel Force Measuring System is comprised of the 6-Component Wheel Force Transducer SLW- 20KND into which a miniature transmitter is built, the 6- Component Force Analyzer MFT-306T, and the Telemeter Receiver DT-24R. There are two 6-Component Wheel Force Transducer SLW-20KND models, one with a rotary encoder type angle detector and one with a non-contact type angle detector. The Receiver DT-24R is lightweight and so can be attached with suction holders. The 6- Component Force Analyzer has the voltage output built-in to output 6-component wheel force, tire rotation count, angle, and other data. The 6-Component Force Analyzer, which is controlled through a PC, comes standard with the control software MFT-7306T.

System block diagram

Digital telemeter type 6-Component Wheel Force Transducer SLW-ND
Digital Telemeter Type High-Accuracy 6-Component Wheel Force Transducer SLW-NE

    This digital-telemeter 6-Component Wheel Force Transducer is comprised of a load cell, which detects external forces passed to the tires from a road surface while driving as the orthogonal three-component force and the three moments around it, and the tire rotation angle detector. After digital conversion in the load cell, the detected threecomponent force, three moments, and tire rotation angles are wirelessly sent to onboard 6-Component Force Analyzer MFT-306T through the Telemeter Receiver DT-24R. The receiver, which can be installed in the passenger car, needs no cable routed from the outside of the car. There are two Transducer models in the line up differing in their tire rotation angle detector, one has a rotary encoder type and the other, a non-contact type. The former can be installed with the Wheel Alignment Displacement Transducer (WAD-1B) that is used to measure wheel alignment at the same time as the six-component forces. To support wheel sizes and around-hub dimensions that differ with each car type, using the "exclusive rim" and "hub adapter" can make installation possible into every passenger car type with a wheel size of 15 inches or larger.
The SLW-NE is added to the ordinary SLW-ND and the stability of output waveform in running is more improved.

Features

  • No supporters and cables outside the passenger car - Safe car driving
  • Signals from the 6-Component Wheel Force Transducer received wirelessly in the car, requiring no cables routed inside and outside the car
  • Installable into every passenger car type using the exclusive rim and hub adapter
  • AA batteries used. Use of secondary batteries also possible

MFT-306T Digital-telemeter type 6-Component Force Analyzer

MFT-306TThe Digital-telemeter 6-Component Wheel Force Transducers SLW-ND attached to the axle shafts allow the external forces passed to the tires from the road surface to be input as an orthogonal three-component force and the three moments around them. After being amplified and converted digitally in the force transducer, an input signal is wirelessly sent to MFT-306T through the Receiver DT-24R. Received data is used to digitally operate the crosstalk correction between each component force and the rotation correction (X and Y components only). 6-component force data, tire rotation count signal are output in voltage form through the output connector of front panel. Monitoring is done through a PC, controlling 6-Component Force Analyzers up to 4 units. The control software MFT-7306T comes standard with the device. After being set up, the analyzer can perform measurement by itself with the PC disconnected.

Features

  • Small and lightweight - Reduction of installation area
  • High-speed operation of crosstalk, rotation correction, etc.
  • 6-component force data, tire rotation count signal output in voltage form
  • Measurement data transferred wirelessly by built-in telemeter
  • Up to 4 controllable units

 

Solution
Applications
Downloads
Order
Related Recommendations
WeChat
Micro-blog
Total Solution Provider for Advanced Civil Engineering Testing Instruments
  • 400-700-9998
  • Service Time : Monday to Sunday, 9:00-18:00
  • E-mail : marketing@epc.com.hk
Copyright © 2008~2015 Earth Products China Ltd. all rights reserved. 粤ICP备12064742号 Domestic headquarters address:West Tower 2301, Fortune Plaza, No. 116, sports east road, Tianhe District, Guangzhou
Hong Kong Headquarter Address:12/F, Asia Trade Centre, 79 Lei Muk Road, Kwai Chung, Hong Kong
Home
Products
Solutions
About Us