Slip-ring Type 6-Component Wheel Force Measuring
6-Component Wheel Force Measuring System
    Model:Slip-ring Type
    Country of Origin:Japan
    Use: The 6-Component Wheel Force Measuring System is comprised of the 6-Component Wheel Force Transducer and the exclusive 6-component force analyzer. Depending on how the 6-component force is detected, there are two types available, the slipring type and the digital telemeter type. The slip-ring 6-Component Wheel Force Measuring System is the combination of the 6-Component Wheel Force Transducer SLW-NC and the 6-Component Force Analyzer MFT-306 or MFT-306R.
  • consult
Details Solution Applications Downloads Order
 The 6-Component Wheel Force Measuring System is comprised of the 6-Component Wheel Force Transducer and the exclusive 6-component force analyzer. Depending on how the 6-component force is detected, there are two types available, the slipring type and the digital telemeter type. The slip-ring 6-Component Wheel Force Measuring System is the combination of the 6-Component Wheel Force Transducer SLW-NC and the 6-Component Force Analyzer MFT-306 or MFT-306R. The MFT-306 is a miniature model (160(W)x25(H)x75(D) mm.) Setting and monitor viewing are done on a PC, controlling up to 4 analyzers. The other model, MFT- 306R, can record measurements using the CF card. After measuring and computing the 6-component force, measurement data and the tire rotation count can be output in voltage form and digitally recorded to the CF card. The CF card can perform recording with up to 4 analyzers synchronously and can also synchronize with the Smart Dynamic Strain Recorder DC-204R.

System block diagram


Slip-ring type SLW-NC 6-Component Wheel Force Transducer

SLW-NC
     The 6-Component Wheel Force Transducer is a thin lightweight load cell, which measures an external force passed to the tires while in motion from the road surface by breaking it down into orthogonal three-component forces and also into three moments around it, can take high-precision measurements in every driving condition using the load detection area in which a strain gauge is strategically applied, the slip-ring and the rotary encoder"s fitting area, which are designed with full consideration to vibration resistance, and a waterproof structure. This transducer is used with the exclusive 6- component force analyzer MFT-306/-306R to show the 6-component force with the car body as the reference for the coordinates. The encoder required for the computation of these angles is built in and also the slip-ring hold mechanism for maintaining the encoder at a constant reference position with respect to the car body is provided as an accessory.


Features

  • High stability
  • Light weight
  • Possible installation to various vehicles using exclusive rim and hub adaptor
  • Easy fixture to a real car
  • Waterproof construction making driving in the rain possible

Miniature 6-Component Force Analyzer MFT-306

MFT-306
     The Miniature 6-Component Force Analyzer MFT-306 uses the 6- Component Wheel Force Transducers attached to the axle shafts to input an external force passed to the tires from a road surface on the basis of an orthogonal three-component force and also of the three moments around it. After being converted into digital form, the input signals are used to digitally compute the crosstalk correction between each component force and the rotation correction with the encoder"s rotation signal. The 6-component force and tire rotation count signals are output in voltage form through the front panel"s output connector. Setting and monitor viewing are done on a PC, controlling 6-Component Force Analyzers up to 4 units. After they are set, the analyzer can perform measurements by itself with the PC disconnected.


Features

  • Small and lightweight - Reduction of installation area
  • High-speed operation of crosstalk, rotation correction, etc.
  • 6-component force data, tire rotation count signal output in voltage form
  • Forward and backward measurement possible with this encoder
  • 6-Component Wheel Force Transducer characteristics data set by PC
  • Up to 4 controllable units

CF card recording 6-Component Force Analyzer MFT-306R

MFT-306R
    The CF card recording 6-Component Force Analyzer MFT-306R also uses the 6-Component Wheel Force Transducer to measure a 6-component force passed to the tires from the road surface, just like the MFT-306. After computation, the 6-component force measurement data and tire rotation count are output in voltage form and digitally recorded to the CF card. The USB port is used to connect to a PC for various settings, monitoring, and the importing/processing of recorded data. The CF card can perform recording with up to 4 analyzers synchronously and can also synchronize with our DC-204R and DC-204Ra.


Features

  • High-speed operation of crosstalk, rotation correction, etc.
  • 6-component force data, tire rotation count signal output in voltage form
  • Forward and backward measurement possible with this encoder
  • 6-Component Wheel Force Transducer characteristics data set by PC
  • Up to 4 controllable units
  • Start-to-stop data recorded in a CF card
  • Synchronous recording of up to 4 units and synchronous measuring of up to 8 units when combined with the DC-204R

 

Solution
Applications
Downloads
Order
Related Recommendations
WeChat
Micro-blog
Total Solution Provider for Advanced Civil Engineering Testing Instruments
  • 400-700-9998
  • Service Time : Monday to Sunday, 9:00-18:00
  • E-mail : marketing@epc.com.hk
Copyright © 2008~2015 Earth Products China Ltd. all rights reserved. 粤ICP备12064742号 Domestic headquarters address:West Tower 2301, Fortune Plaza, No. 116, sports east road, Tianhe District, Guangzhou
Hong Kong Headquarter Address:12/F, Asia Trade Centre, 79 Lei Muk Road, Kwai Chung, Hong Kong
Home
Products
Solutions
About Us