InfReC R300BP-TF
Infrared Thermal Imager
    Model: InfReC R300BP-TF
    Country of Origin: Japan
    Use: "Japanese-made" high sensitivity uncooled infrared detector on board. Sharp thermal image of passing through flame inside of combustion furnace.
  • consult
Details Solution Applications Downloads Order

Sharp thermal image of passing through flame inside of Coal and Oil refinery furnaces

"R300BP-TF" is the most effective infrared thermal imaging camera to find out the state of adhered clinker and diagnosing deterioration of internal facility of furnace.

Maintenance-free operation thanks to "Japanese-made" Uncooled infrared detector!

"R300BP-TF" detects infrared ray in the "Short-wavelength" region, between 3.7µm and 3.9µm, by the combination of "Japanese-made" high sensitivity Uncooled infrared detector with 3.8µm passing-through-flame filter.
As a result, the new model "R300BP-TF" features significantly reduced price and maintenance-free operation in comparison with the conventional model equipped with cooled infrared detector. You can use "R300BP-TF" without worrying about lifetime and maintenance cost of cooling detector.



By stretching the sensitivity of the "Japanese-made" uncooled detector to the short-wavelength region, it is possible to eliminate the flame influence by using a 3.8µm passing-through-flame filter.

The principle of measurement Through Flame and Feature points of R300BP-TF
Transmittance of flame / Radiation intensity
When fuel gas (Hydrocarbon Gas) burns, the infrared energy radiates from not only flame but also H2O and CO2.
For above condition, taking thermal image passing through flame by infrared thermal imaging camera (IR camera) is required following conditions;

  1. Select absorb-less band of wavelength by Gas (CO2 and water vapor) that is generated when fuel gas burns.
  2. Select wavelength band as far away from Flame Infrared Energy radiant intensity wavelength as possible.
  3. Use infrared detector, which has sensitivity with above wavelength band.
Therefore, the suitable wavelength band for taking thermal image passing through flame is 3.8µm wavelength band.
Generally, this wavelength band is detected by cooled type infrared detector, however, this type IR camera is very expensive and its cooler requires maintenance at constant time usage.
Avio achieved success to stretching sensitivity to short-wavelength band by "Japanese-made" Uncooled type infrared detector. Herewith, we realized to reducing-cost and maintenance-free of R300BP-TF.

  • *Note: Depending on combustion gas kinds, R300BP-TF has possibility that cannot eliminate flame, and it influence to measuring result. We recommend to test by Demo-Unit before purchasing.

User-Friendly operability and mobility

Making a quick measurement even under harsh measurement environments
  • Lightweight and compact body (battery operated) weighing only 1.5kg (including a battery pack, excluding a protection shield)
  • Thermal movie data can be recorded directly to SD card at max speed 10Hz only by the camera.
    Therefore, required data can be recorded in a short time without PC. In addition, the Thermal movies data is analyzable by the dedicated standard software "InfReC Analyzer NS9500 Professional" later.
Thermal Images
  • A tilting LCD monitor enables images to be captured at various angles.
  A tilting LCD monitor enables images to be captured at various angles.
  • "Full-auto function" allows temperature scale and focus to be adjusted simultaneously.
Full-auto function

Folding protection shield included as Standard Accessories

Imaging is possible while assuring the safety of the operator from intensive radiant heat.

Combination with relay lens insertable in the furnace is available (optional lens)

A wide angle thermal image shooting (up to 100°) is available by inserting "custom-made" relay lens into furnace call hole.
Relay Lens


Related Recommendations
Total Solution Provider for Advanced Civil Engineering Testing Instruments
  • 400-700-9998
  • Service Time : Monday to Sunday, 9:00-18:00
  • E-mail :
Copyright © 2008~2015 Earth Products China Ltd. all rights reserved. 粤ICP备12064742号 Domestic headquarters address:West Tower 2301, Fortune Plaza, No. 116, sports east road, Tianhe District, Guangzhou
Hong Kong Headquarter Address:12/F, Asia Trade Centre, 79 Lei Muk Road, Kwai Chung, Hong Kong
About Us