Fakopp - Portable Pneumatic Pole
    Model:Portable Pneumatic Pole
    Country of Origin:Hungary
    Use: The portable pneumatic pole for anemometer is a pole which can be used alone as well. 
  • consult
Details Solution Applications Downloads Order


The portable pneumatic pole for anemometer is a pole which can be used alone as well. No special assembling of the pole itself is needed. Only the holding ropes should be fixed correctly. The packed pole is about only 2 m long but it can be erected to 10 m height. Both the extending and the collapsing of the tower can be done alone.

Usage Instructions

  1. Fix the base and the fasten spikes to the proper positions.
  2. Fix the shorter ropes to the fasten spikes and to the lower fixing triangles. Put the anemometer to its position.
  3. Connect the compressor to the base and start the erection.When the extension is finished disconnect the compressor. Measure.
  4. After the measurement let the tubes slide back.
Package Contents
  • alu tube (2 m - 10 m) 17kg
  • compressor
  • battery for the compressor
  • 3 pieces 7 m ropes
  • 3 pieces 13 m ropes
  • 3 pieces 250-300 mm nails
  • 3 pieces anchoring spikes
  • hammer
  • case
Technical Specification
  • Maximal height: 10 m
  • Maximal loading capacity: 2 kg
  • Maximum allowable wind speed: 33 m/s
  • Weather proof: Yes, IP65

Related Recommendations
Total Solution Provider for Advanced Civil Engineering Testing Instruments
  • 400-700-9998
  • Service Time : Monday to Sunday, 9:00-18:00
  • E-mail : hkmarketing@epc.com.hk
Copyright © 2008~2021 Earth Products China Ltd. all rights reserved. 粤ICP备12064742号 Domestic headquarters address:West Tower 2301, Fortune Plaza, No. 116, sports east road, Tianhe District, Guangzhou
Hong Kong Headquarter Address:12/F, Asia Trade Centre, 79 Lei Muk Road, Kwai Chung, Hong Kong
About Us