CompactRotoSonic CRS-XL Max
Sonic Drill Rigs
    Model: CompactRotoSonic CRS-XL Max
    Country of Origiin: Netherlands
    Use: The CompactRotoSonic XL Max crawler is built to work in the most diverse working conditions. You can use it in small spaces because of its high manoeuvrability.
  • consult
Details Solution Applications Downloads Order

The CompactRotoSonic XL Max crawler is built to work in the most diverse working conditions. You can use it in small spaces because of its high manoeuvrability. A separate swivel allow for liquid, foam or air assisted drilling. The XL Max allows you to use SPT as well.

The CompactRotoSonic XL Max is outfitted with

  • Sonic head: Sonic vibration oscillator output force 150 kN (synchronized), frequency 0 - 150 Hz (see here for detailed specification sheet)
  • Rig: John Deere 4 cylinder water cooled engine 129 kW (173 HP)
  • Hydraulic system: load sensing
  • Mast: Sonic Drilling mast with 4.500mm stroke, 600 mm mast dump
  • Winch: Pull at 1st layer 1000 daN

The CompactRotoSonic XL Max is available with these options

  • SPT auto drop hammer with blow count meter on control panel.
  • Casing lifter mounted on break out clamp 20 ton, stroke 300mm.
  • Automatic manipulator with block valves and accumulators for secured grip and operation.
  • Drill pipe storage suitable for 36-40 rods at 3m length. (total meterage of drill rod storage depending on diameter). 
  • Pneumatic separators among different rod layers.

CompactRotoSonic HT drill head    (full specification sheet)

  • Max frequency 0-150 Hz
  • Sonic vibration oscillator output force 150 kN / 33.8 k lbf
  • 2 eccentrics, mechanically synchronized
  • Rotation torque: clockwise 0-120 rpm 2.650 Nm @ 185 bar / 1,955 ft-lbf @ 2,680 psi
  • Rotation torque: counter clockwise 3.000 Nm @ 210 bar / 2,210 ft-lbf @ 3,045 psi

Rig

  • John Deere 4 cylinder water cooled engine 129 kW / 173 HP
  • Dimensions folded (LxWxH) approx. 8.850 x 2.310 x 2.995mm / 29’ x 7’7” x 9’11”
  • Height (when drilling) max. 7.500mm / 24’7”
  • Mass approx. 12.000 kg / 26,455 lbs
  • Fuel tank (diesel) 190 liter / 50 gallon
  • Load sening hydraulic system
  • Control panel on turning arm
  • High pressure water pump 19 l/min. @ 210 bar / 5 gpm @ 3,045 psi
  • Large flow water pump 160 l/min. @ 45 bar / 42 gpm @ 652 psi
  • Aluminum water tank 500 liter / 132 gallon
  • Rubber tracks
  • Radio remote for driving
  • Work lights 4

Rod / casing handler

  • Mechanical separators among different rod layers
  • Casing or drill rod storage depends on diameter and length

Mast

  • Stroke 4.500 mm / 14’9”
  • Mast dump 600 mm / 2’
  • Pull up 80 kN / 18,000 lbf
  • Pull down 65 kN / 14,610 lbf
  • Pull up and down speed 40 m/min / 130 ft/min
  • Double hydraulic break out clamp 60-280 mm /  2 3/8” - 11”
  • Adjustable clamping force of 110 kN / 24730 lbf
  • Break out torque 20 kNm / 14750 ft-lbf
  • Hydraulic break out cylinder
  • Main winch 1000 daN, 100m/min, 100 m / 2,250 ft-lbf, 328' / min, 328'

Solution
Applications
Downloads
Order
STQ180096
Related Recommendations
WeChat
Micro-blog
Total Solution Provider for Advanced Civil Engineering Testing Instruments
  • 400-700-9998
  • Service Time : Monday to Sunday, 9:00-18:00
  • E-mail : marketing@epc.com.hk
Copyright © 2008~2015 Earth Products China Ltd. all rights reserved. 粤ICP备12064742号 Domestic headquarters address:West Tower 2301, Fortune Plaza, No. 116, sports east road, Tianhe District, Guangzhou
Hong Kong Headquarter Address:12/F, Asia Trade Centre, 79 Lei Muk Road, Kwai Chung, Hong Kong
Home
Products
Solutions
About Us