Eijkelkamp - Break-Out Clamps
Sonic Tooling
    Model: Break-Out Clamps
    Country of Origiin: Netherlands
    Use: A break out clamp mounted at the base section of a drill mast means that the breaking of casing or rod connections is rapid, safe, sure and ergonomically friendly. 
  • consult
Details Solution Applications Downloads Order

Purpose

A break out clamp mounted at the base section of a drill mast means that the breaking of casing or rod connections is rapid, safe, sure and ergonomically friendly. 

Application

The casing is pulled up in such a way that the bottom and top clamp can clamp the bottom and top casing. Then the cylinder that rotates the upper casing is operated to break the connection. The top clamp is loosened to allow the drill motor to untwist the top casing further. The top clamp is closed again which allows breaking and completely untwisting the drill head spindle from the top casing. Then, the top casing is lifted and stacked by hand or with a manipulator. The drill head is lowered on the bottom casing (which is still clamped in the lower clamp) and twisted in. The lower clamp is loosened and the casing is pulled up. This sequence is repeated until all casing sections or rods have been removed.

Types 301226 and 321226

You can choose from two types: The lighter type allows clamping 50-200 mm casing and is meant to be build on CompactSonic rigs (not for SonicMast CRS-T or CRS-P). The heavier type (50-280 mm) is meant for MidRotoSonic and LargeRotoSonic units. Of course you can bolt them on any rig working with casing or rods with these dimensions.

These are heavy duty clamps equipped with oversized bearings and hydraulic parts. The construction is based on many years of experience and intensive use. All parts are exchangeable. Grip bit inserts can be field exchanged within minutes.

In short:

  • All sliding surfaces are tempered and are in addition fitted with lubrication points
  • Rotation is perfectly guided by a double thrust block
  • Top and bottom clamps can be mounted at various distances to comply with any casing thread type
  • The unscrewing part can be separated from the clamping part
  • All components are separately replaceable and in stock
  • Grip bit inserts (hardened at 58 Hrc) replaceable in only a few minutes
  • Clamping and untwisting parts can be done independently

Specifications double break out clamp 321226

  • Casing / rod size capacity (at joint): 50-280 mm
  • Exchangeable grip bits
  • Clamping force 212 kN
  • More specifications (sizes) on demand
  • Breaking torque 48.7 kNm
  • Weight 470 kg
  • Working pressure at full force 270 bar
  • Clock- or anti-clockwise operation

Specifications double break out clamp 301226

  • Casing / rod size capacity (at joint): 50-200 mm
  • Exchangeable grip bits
  • Clamping force 70 kN
  • More specifications (sizes) on demand
  • Breaking torque 20.3 kNm
  • Weight 194 kg
  • Working pressure at full force 180 bar
  • Clock- or anti-clockwise operation

Solution
Applications
Downloads
Order
Related Recommendations
WeChat
Micro-blog
Total Solution Provider for Advanced Civil Engineering Testing Instruments
  • 400-700-9998
  • Service Time : Monday to Sunday, 9:00-18:00
  • E-mail : marketing@epc.com.hk
Copyright © 2008~2015 Earth Products China Ltd. all rights reserved. 粤ICP备12064742号 Domestic headquarters address:West Tower 2301, Fortune Plaza, No. 116, sports east road, Tianhe District, Guangzhou
Hong Kong Headquarter Address:12/F, Asia Trade Centre, 79 Lei Muk Road, Kwai Chung, Hong Kong
Home
Products
Solutions
About Us